Jungheinrich 50435801, Руководство по эксплуатации

Страница: 56 / 83

F 3
0307
.GB
3 Servicing and inspection
Thorough and expert servicing is one of the most important preconditions for safe op-
eration of the fork lift truck. The neglect of regular servicing intervals can lead to fork
lift truck failure and constitutes a potential hazard to personnel and equipment.
M
The indicated servicing intervals are based on single-shift operation under normal op-
erating conditions. For applications in dusty environments, or involving large temper-
ature fluctuations or multiple-shift operation, the servicing intervals must be
shortened accordingly.
The following servicing checklist indicates the operations to be performed and the re-
spective intervals to be observed. The servicing intervals are defined as follows:
W = every 50 operating hours, but at least once per week
A = every 500 operating hours
B = every 1000 operating hours, or at least annually
C = every 2000 operating hours, or at least annually
Z
W service intervals are to be performed by the customer.
In the run-in period - after approx. 100 service hours - or after repair work, the owner
must check the wheel nuts/bolts and re-tighten if necessary.
F 3
0307
.GB
3 Servicing and inspection
Thorough and expert servicing is one of the most important preconditions for safe op-
eration of the fork lift truck. The neglect of regular servicing intervals can lead to fork
lift truck failure and constitutes a potential hazard to personnel and equipment.
M
The indicated servicing intervals are based on single-shift operation under normal op-
erating conditions. For applications in dusty environments, or involving large temper-
ature fluctuations or multiple-shift operation, the servicing intervals must be
shortened accordingly.
The following servicing checklist indicates the operations to be performed and the re-
spective intervals to be observed. The servicing intervals are defined as follows:
W = every 50 operating hours, but at least once per week
A = every 500 operating hours
B = every 1000 operating hours, or at least annually
C = every 2000 operating hours, or at least annually
Z
W service intervals are to be performed by the customer.
In the run-in period - after approx. 100 service hours - or after repair work, the owner
must check the wheel nuts/bolts and re-tighten if necessary.