Jungheinrich 50435801, Руководство по эксплуатации

Страница: 40 / 83

E 17
11
06
.G
B
Commissioning
After switching on the master switch and, if required, the key switch, the LED (21)
lights up red.
After entering the correct operator code (factory setting 2-5-8-0) the LED (21) lights
up red.
When an incorrect code has been entered, LED (21) lights up red for two seconds.
After that you can enter a new code.
Z
The Set key (22) has no function in operating mode.
Switching off
The truck is switched off by actuating the
o -
key (26).
Z
The truck can be switched off automatically
after a preset time. For that purpose the cor-
responding code lock parameter must be set
(refer to section 5.4).
1 2 3
4 5 6
7 8 9
0
Set
23
22
21
26
25 24
E 17
11
06
.G
B
Commissioning
After switching on the master switch and, if required, the key switch, the LED (21)
lights up red.
After entering the correct operator code (factory setting 2-5-8-0) the LED (21) lights
up red.
When an incorrect code has been entered, LED (21) lights up red for two seconds.
After that you can enter a new code.
Z
The Set key (22) has no function in operating mode.
Switching off
The truck is switched off by actuating the
o -
key (26).
Z
The truck can be switched off automatically
after a preset time. For that purpose the cor-
responding code lock parameter must be set
(refer to section 5.4).
1 2 3
4 5 6
7 8 9
0
Set
23
22
21
26
25 24