Jungheinrich 50435801, Руководство по эксплуатации

Страница: 41 / 83

11
06
.G
B
E 18
5.2 Travel programmes
By actuating the numeric keys 1, 2, and 3 you can select three travel programmes.
The activated programme is indicated by the green LEDs (23), (24), (25) in the cor-
responding key.
Z
The travel programmes differ with respect to travelling speed, acceleration, and de-
celeration.
Factory settings:
– Programme 1: Soft running
– Programme 2: Normal operation
– Programme 3: Power operation (preset for commissioning)
Z
The travel programs can be adapted individually to the truck (refer to section 5.4).
5.3 Parameters
In programming mode, the operator keyboard allows the setting of the code lock func-
tions and the adaption of the travel programmes. Additionally, the battery parameters
can be set.
Z
For trucks without indicator instrument (CANDIS (
o
)) only the code lock parameters
can be set.
Parameter groups
The parameter number is composed of three digits. The first digit designated the pa-
rameter group according to table 1. The second and third digits are sequentially num-
bered from 00 to 99.
No. Parameter group
0xx Code lock settings
(Codes, travel programme enable, automatic switch-off, etc.)
1xx Travel programme 1 parameters
(Acceleration, coasting brake, speed, etc.)
2xx Travel programme 2 parameters
(Acceleration, coasting brake, speed, etc.)
3xx Travel programme 3 parameters
(Acceleration, coasting brake, speed, etc.)
4xx Programme-independent parameters
11
06
.G
B
E 18
5.2 Travel programmes
By actuating the numeric keys 1, 2, and 3 you can select three travel programmes.
The activated programme is indicated by the green LEDs (23), (24), (25) in the cor-
responding key.
Z
The travel programmes differ with respect to travelling speed, acceleration, and de-
celeration.
Factory settings:
– Programme 1: Soft running
– Programme 2: Normal operation
– Programme 3: Power operation (preset for commissioning)
Z
The travel programs can be adapted individually to the truck (refer to section 5.4).
5.3 Parameters
In programming mode, the operator keyboard allows the setting of the code lock func-
tions and the adaption of the travel programmes. Additionally, the battery parameters
can be set.
Z
For trucks without indicator instrument (CANDIS (
o
)) only the code lock parameters
can be set.
Parameter groups
The parameter number is composed of three digits. The first digit designated the pa-
rameter group according to table 1. The second and third digits are sequentially num-
bered from 00 to 99.
No. Parameter group
0xx Code lock settings
(Codes, travel programme enable, automatic switch-off, etc.)
1xx Travel programme 1 parameters
(Acceleration, coasting brake, speed, etc.)
2xx Travel programme 2 parameters
(Acceleration, coasting brake, speed, etc.)
3xx Travel programme 3 parameters
(Acceleration, coasting brake, speed, etc.)
4xx Programme-independent parameters