Application
Ref. no. 2103 REG ES
Page 37
of 44
Description:
Values:
Comment:
Send counter cyclically (s)
0
...172800
The following counter levels of Channel
3 can be transmitted cyclically:
Counter level
¼
-hour counter level
Counter level, Rate 1
Counter level, Rate 2
Counter level, Rate 3
Setting of the seconds of the cycle time
or switch-off of this function with the
value 0.
1/4-hour counter value cyclic sending
Yes
No
The
¼
-hour counter level of Channel 3
can be excluded from the cyclical
transmission configured above, in order
to reduce the bus load.
Send counter on change (Wh)
0
...4240
The following counter levels of Channel
3 can be transmitted on a change by a
configured value:
Counter level
Counter level, Rate 1
Counter level, Rate 2
Counter level, Rate 3
Setting of the change at which the
counter levels are to be transmitted.
Send current counter on change (Wh)
0
...4240
The following current counter levels of
Channel 3 can be transmitted on a
change by a configured value:
Current counter level, Rate 1
Current counter level, Rate 2
Current counter level, Rate 3
Setting of the change at which the
current counter levels are to be
transmitted.
Current counter Rate 1
Via Rate
parameters
Via trigger objects
Here, it is possible to specify whether
the current counter of Channel 3 for
Rate 1 is to be activated using Rate
parameters (i.e. time or Rate object) or
via trigger objects.
Current counter Rate 1 - Trigger 2
Stop
Continue
If the current counter of Channel 3 for
Rate 1 is to be activated via trigger
objects, the counter is either stopped
on receipt of trigger object 2 or
continues counting.
Current counter Rate 2
Via Rate
parameters
Via trigger objects
Here, it is possible to specify whether
the current counter of Channel 3 for
Rate 2 is to be activated using Rate
parameters (i.e. time or Rate object) or
via trigger objects.
