Application
Ref. no. 2103 REG ES
Page 27
of 44
Description:
Values:
Comment:
Hysteresis (W)
0
..4240
A hysteresis can be configured for the
over or undershooting of a limit value of
the effective power measured on
Channel 1. On overshooting, the actual
limit value is
Limit value +
½
hysteresis
and, on undershooting,
Limit value -
½
hysteresis.
Specification of the hysteresis for the
effective power measured on Channel
1.
Send reactive power on change (W)
0
...4240
The reactive power measured on
Channel 1 can be transmitted on
changes.
Setting of the reactive power change, at
which the measured effective power is
transmitted, or switch-off of this function
with the value 0.
→
Measurement - Channel 2
Send measured values cyclically (s)
0
...172800
The following measured values of
Channel 2 can be transmitted cyclically:
Voltage (rms.)
Current (rms.)
Effective power
Reactive power
Setting of the seconds of the cycle time
or switch-off of this function with the
value 0.
Send voltage on change (V)
0
...265
The voltage measured on Channel 2
can be transmitted on changes.
Setting of the voltage change, at which
the measured voltage is transmitted, or
switch-off of this function with the value
0.
Send current intensity on change
(0.1 A)
0
...160
The current intensity measured on
Channel 2 can be transmitted on
changes.
Setting of the current intensity change,
at which the measured current intensity
is transmitted, or switch-off of this
function with the value 0.
Send effective power on change (W)
0
...4240
The effective power measured on
Channel 2 can be transmitted on
changes.
Setting of the effective power change,
at which the measured effective power
is transmitted, or switch-off of this
function with the value 0.
