– 42 –
ddddd
Function to select the start-up speed of the sewing machine (Function setting No. 76)
This function is selected in the case where the speed of the sewing machine is desired to be more at the time of
start-up. (Time required to start is shortened by approximately 10%.)
0 : Normal curve
1 : More sharp curve
(Caution) If “1” is set, motor may move irregularly. In addition, noise may occur when the sewing ma-
chine is running or noise may increase when the sewing machine is running.
fffff
Function of pedal curve selection (Function setting No. 87)
This function can perform the selection of the curve of number of rotation of the sewing machine against the
depressing amount of the pedal.
Change to this function when you feel that inching operation is hard or that pedal response is slow.
0 : Number of rotation of the sewing machine in
terms of the depressing amount of the pedal
increases linearly.
1 : Reaction to intermediate speed in terms of the
depressing amount of the pedal is delayed.
2 : Reaction to intermediate speed in terms of the
depressing amount of the pedal is advanced.
ggggg
Function added to the needle up / down compensating switch (Function setting No. 93)
One stitch operation can be performed only when the needle up / down compensating switch is pressed at the
time of upper stop immediately after turning ON the power switch or upper stop immediately after thread trim-
ming.
0 : Normal (Only needle up / down compensating stitching operation)
1 : One stitch compensating stitching operation (upper stop . upper stop) is performed
only when aforementioned changeover is made.
hhhhh
Continuous sti one shot stitching nonstop function (Function setting No. 94)
In IP-100 program functions, this is a function that does not stop the sewing machine at the last of a step and
proceeds to the next step when performing sewing by combining continuous stitching with one shot stitching.
Select this function when you desire to execute the overlapped stitching of 19 stitches or more.
0 : Normal (Stop when a step has completed.)
1 : The sewing machine proceeds to next step without stopping after a step has com-
pleted.
jjjjj
Setting of max. number of rotation of the sewing machine head (Function setting No. 96)
his function can set the max. number of rotation of the sewing machine head you desire to use.
Upper limit of the set value varies in accordance with the sewing machine head to be connected.
50 to Max. [rpm] <50 / rpm>
kkkkk
Sewing counter input function (Function setting No. 101)
This function can change over the count of the sewing counter displayed on the panel, when connecting IP-100
panel, whether to the external sewing counter switch input or to the automatic updating by the internal thread
trimming count.
0 : Every time thread trimming is performed, the counter automatically counts up.
1 : Every time the sewing counter switch is inputted, the counter counts up.
8
7
0
9
3
0
9
4
0
9
6
4
0
0
0
1
0
1
0
7
6
0
Number of rotation (rpm)
Pedal stroke (mm)
0
1
2
