– 14 –
Operating procedure
[Maintenance personnel level]
Press communication mode switch
for approximately three seconds in the information screen.
ictograph on the left end of the communication screen is shown in reverse video.
Communication screen (Maintenance personnel level)
7. Communication setting
1
Data selection
Press data selection switch
in the communication screen.
Data selection screen
Select the data to perform communication, and press set key switch
.
2
Communication method selection
Press communication method selection switch
in the communication screen.
Communication method selection screen
Kind of selected data
Data selection
Data communication
source
Data
communication
destination
Communication
method selection
Start of
communication
