– 35 –
88888
Optional switch function selection (Function setting No. 12) : It is used only when it is combined with the
machine head provided with the optional switch.
Functions to be assigned to the optional switch can be selected from the following functions.
0 : No function (Standard setting)
1 : Needle up / down compensating stitching : Every time the switch is pressed, normal feed
stitching by half stitch is performed. (Same operation as that of up / down compensating
stitching switch on the panel.)
2 : Back compensating stitching : Reverse feed stitching is performed at low speed while
the switch is held pressing. (It is effective only when constant dimension sewing pattern
is selected with the CP-160 or higher class model.)
3 : Function of canceling once reverse feed stitching at the end of sewing : By depressing
the back part of the pedal after pressing the switch, operation of reverse feed stitching is
canceled once.
4 : Thread trimming function : This function is actuated as the thread trimming switch.
5 : Presser foot lifting function : This function is actuated as the foot lifter switch.
6 : One stitch compensating stitching : Every time the switch is pressed, one stitch stitching
operation is executed.
7 : Function of simultaneously canceling reverse feed stitching at the start and end of sewing :
By operating the optional switch, ineffective/effective can be alternately changed over.
8 : Function of neutral presser lifting change-over : By operating the optional switch, ON/
OFF can be changed over alternately.
(Note) Indication
of reverse feed stitching at the start and
end of sewing on the operation panel is the same
even when the function is canceled. So, be careful.
99999
Sewing counting function (Function setting No. 14)
The function counts up every time thread trimming is completed and counts the number of completion of the
sewing process.
This can be realized together with the IP-100 control panel. Refer to the explanation of the control panel.
0 : Sewing counter function is not operative.
1 : Sewing counter function is operative.
(Indication on the IP-100 control panel will go out as well.)
00000
Bird’s nest prevention function (Function setting No. 18 to 20, 28, 65, 66, 89, 100)
This function prevents the thread from being entangled at the sewing start.
This function is used only when it is combined with the sewing machine head with bird’s nest prevention specifi-
cations.
(When using this function, the optional unit A is necessary.)
1. Bird’s nest prevention function (Function setting No. 18)
0 : Bird’s nest prevention function is ineffective.
1 : Bird’s nest prevention function is effective.
2 : Bird's nest prevention function is operative.(with tension release)
Setting of function setting Nos. 19 to 20, 28, 65, 66, 89 and 100 becomes ineffective.
2. Needle thread release function at the sewing start (Function setting No. 19)
0 : Not provided with needle thread release function at the sewing start (Normal)
1 : Provided with needle thread release function at the sewing start
3. Number of condensation stitches at the sewing start (Function setting No. 20)
Number of condensation stitches at the sewing end can be set.
Setting range
1 to 9 stitches
0 : Condensation function is ineffective.
4. On-timing of solenoid for condensation stitch (when condensation stitch is performed by 1 stitch.)
(Function setting No. 65)
Starting timing of solenoid for condensation of 1 stitch can be corrected by angle at the unit of 10
°
.
Adjusting range
-36 to 0 <1 / 10
°
>
5. On-timing of solenoid for condensation stitch (when condensation stitches are performed by 2 stitches or
more.) (Function setting No. 66)
Starting time of solenoid for condensation of 2 stitches or more can be corrected by angle at the unit of 10
°
.
Adjusting range
-36 to 0 <1 / 10
°
>
1
2
0
1
4
0
1
8
1
1
9
0
2
0
0
6
5
-
1
5
6
6
-
1
5
