JUKI SC-910 страница 9 Скачать руководство пользователя

Страница: 9 / 71

– 5 –

No.

Description

Power indication LED : Lights up when the power switch is turned ON.

Max. speed limit variable resister : Maximum speed is limited when this resister is moved in the left

direction ( ).

Reverse stitching pattern switch : Used for specifying the reverse stitching pattern to be sewn.

Overlapped stitching pattern switch : Used for specifying the overlapped stitching pattern to be sewn.

Constand dimension stitching pattern switch : Used for specifying the constant dimension stitching

pattern to be sewn.

Rectangular stitching pattern switch : Used for specifying the rectangular stitching pattern to be sewn.

Automatic reverse stitching at the start of sewing switch : Used for turning ON / OFF the automatic

reverse stitching at the start of sewing.

Automatic reverse stitching at the end of sewing switch : Used for turning ON / OFF the automatic

reverse stitching at the end of sewing.

Automatic double reverse stitching at the start of sewing switch : Used for turning ON / OFF the

automatic double reverse stitching at the start of sewing.

Automatic double reverse stitching at the end of sewing switch : Used for turning ON / OFF the

automatic double reverse stitching at the end of sewing.

Switches for setting the number of stitches : Used for setting the number of stitches to be sewn in

processes A through D.

Material edge sensor ON / OFF switch : Rendered effective when the material edge sensor is

installed on the machine. Used for selecting whether or not the material sensor is used during sewing.

One-shot automatic stitching switch : Start the sewing machine with this switch, and the sewing machine

will run automatically until the material edge is detected or the end of the set number of stitches is reached.

Automatic thread trimming switch : When the material edge is detected, the machine will perform

thread trimming even when keeping depressing the front part of the pedal.

Thread trimming prohibition switch : Used for prohibiting thread trimming at any occasion.

Bobbin thread counter : Indicates the amount of bobbin thread while counting it by subtracting from the set

value. When the bobbin thread remaining amount detecting device is installed on the machine, the counter

indicates the number of times of detecting.

Bobbin counter reset switch : Used for returning the value shown on the bobbin thread counter to

the initial value.

Bobbin thread amount setting switch : Used for setting the amount of bobbin thread.

No. of pcs. counter : The indication shown on the counter increases while counting up the number of

finished pieces of garment every time the machine performs thread trimming.

Teaching switch : Used for setting the number of stitches to a value which has been actually sewn.

Needle up/down compensating switch : Used when performing needle up / down compensating stitching.

Re-sewing switch : If the bobbin thread runs out before the completion of the operation steps of a

programmed stitching pattern, this switch is used for re-starting stitching from the position where the

stitching has been interrupted after replacing the bobbin.

Screen changeover switch : This is the switch to change over the screen.

Reset switch : This is the switch to make the value of bobbin thread counter or sewing counter the set value.

nformation switch : This is the switch to perform various function settings.

Counter value setting switch : This is the switch to set the value of bobbin thread counter or No. of pcs. counter.

Smart media cover : This is the cover for smart media inserting opening.

Smart media slot (Smart media inserting opening) : To set smart media, insert smart media into

smart media slot and push it until it is almost hidden.

Smart media :

( Optional : Part No.HX005750000 )

CP-
160

IP-

100

Содержание SC-910








































































Результаты поиска

Содержание SC-910

Отзывы:

Похожие инструкции для SC-910

Бренды по названию

Популярные бренды

JUKI SC-910, Руководство инженера

Результаты поиска

Содержание SC-910

Отзывы:

Похожие инструкции для SC-910

Бренды по названию

Популярные бренды