85
1) Press
to display the reverse feed stitching setting screen.
2) Select the shape of condensation in the reverse feed stitching screen.
1
: Select the shape of condensation at sewing start from among 1 to 20.
Standard condensation
, 2-point-condensation
and condensation customs
to
are
changed over and displayed in the display section.
4
: Select the shape of condensation at sewing end from among 1 to 20.
Standard condensation
, 2-point condensation
and condensation customs
to
are
changed over and displayed in the display section.
2
,
5
: Needle entry position is displayed when selecting the condensation custom.
3
,
6
: Total display and partial display of the condensation custom pattern are changed over.
(2) condensation custom edit
condensation custom edit screen
3) Set the needle entry position for each step in the condensation custom edit screen.
1
: Set the step with “+” and “–” key.
2
: Set the value of needle entry point from the center of zigzag with “+” and “–”. “+” value comes
on the right side and “–” value on the left side.
3
: Needle entry position is displayed.
4
: Insert needle entry point 0. 0 for one stitch to the existing step. Then the stitches move
backward one stitch by one stitch.
* It is not possible to insert it when the number of total stitches is 64 stitches.
5
: Delete one stitch of the needle entry of the existing step. Then the stitches move forward one stitch
by one stitch.
* It is not possible to delete it when the number of total stitches is “1” stitch.
7
: Set the feed amount with “+” and “–”.
1) Press
to display the
reverse feed stitching
setting screen.
2) Press
2
or
4
in the
reverse feed stitching
setting screen to move to
the condensation custom
edit screen.
q w
q w
y
e
r
t
7
