106
(3) communication mode
The matters below can be performed in the communication mode.
1) Sewing machine data server utility (hereafter : SU-1) or vector form (VDT) data from media can be
registered to non-registered No. of custom pattern.
2) Custom pattern can be changed to the vector form and be uploaded to SU-1 or the media.
3) Parameter data (EPD) can be overwritten and registered to the condensation custom pattern from SU-1 or
the media.
4) Condensation custom pattern can be uploaded to SU-1 or the media.
* For setting of the communication with SU-1, refer to the Instruction Manual for SU-1.
communication setting screen (download)
[Maintenance personnel level]
1) Turn ON the power. When the needle bar is not in the UP position, turn the handwheel to bring the needle
bar to its UP position.
2) Press switch
1
for approximately three seconds to display the information screen.
2
: Ver display For the details, refer to the Engineer
’s Manual.
3
: Sewing common data
4
: Function setting
Refer to 6-17. Function setting procedure.
5
: Sewing management information
6
: Communication mode
7
: Hook adjusting mode
Refer to 8-6. Hook adjusting mode.
8
: Media format
For the details, refer to the Engineer’s Manual.
* When the media format is executed, all of the data that have been recorded at present disappear.
Be careful not to use it other than initialization of the media.
Information screen (Maintenance personnel level)]
q
i
u
y
t
r
e
w
q
w
4
e
3
