81
2) Press switch
2
corresponding to the
pattern which has been
registered in the custom
pattern selection pop-up
screen.
custom pattern selection pop-up screen
sewing shape setting screen
4) Zigzag width, position of stitch base line, etc. of custom pattern can be set in the sewing shape setting screen.
3
: Select free stitching, overlapped stitching or programmed stitching.
4
: Set the zigzag width with “+” and “–”.
(The whole can be enlarged or reduced taking the inputted left and right positions as reference.)
5
: Set the position of stitch base line with “+” and “–”.
6
: Needle entry position is displayed.
7
: Total display and partial display of the custom pattern are changed over.
(2) New creation of the custom pattern
Custom pattern is newly created.
New creation pop-up screen
1) Press
in the custom pattern selection pop-up screen to display the new creation pop-up screen.
2) Nos. which have not been registered at present are displayed in
1
. Select the No. you desire to obtain
with “+” and “–”.
When
is pressed here, the screen returns to the former one without creating the pattern.
3) When
is pressed, new creation is performed.
The No. which has been created is in the selective state. Continue to perform the edit of custom pattern.
w
y
e r t
e r t
7
q
q
3) Press
to display the
sewing shape setting
screen.
