99
There are two kinds of the counters, thread trimming counter and bobbin thread counter. Display of the
counter is changed over by pressing the switch of
1
.
(2) Bobbin thread counter
(5) Performing the constant-dimension stitching using the cycle stitching
Constant-dimension stitching, zigzag patterns of which are different from each other in the respective steps
can be performed by setting the number of stitches in the cycle stitching.
Example) In the process of label attaching, change over the
zigzag patterns of constant-dimension stitching of
2-step zigzag stitch and straight stitch as shown
in the figure, and perform the constant-dimension
stitching.
1) Register in advance the 2-step zigzag stitch for the shape
of pattern 1 and the straight stitch for the shape of pattern 2.
2) Set the number of stitches in each step as shown in the
table.
3) Set “END” mark to the 5th step to complete
registration.
No. of step
1
2
3
4
Pattern No.
1
2
1
2
Number of stitches
100
50
100
50
Step 4
Step 3
Label
Step 2
Step 1
6-15. counter
Picture of
is displayed in
1
.
Every time thread trimming is performed, the value
increases by 1 count. (0
→
1
→
2 ......
→
9999)
Counter value can be corrected with counter value
setting switch
3
.
In addition, the thread trimming counter value returns to
“0” when reset switch
2
is pressed.
resetting cannot be performed during sewing. Perform thread trimming once.
q
w
e
Picture of
is displayed in
1
.
The counter subtracts from the predetermined value set with counter value setting switch
3
in accordance
with the number of stitches of the sewing machine.
When the counter value reaches minus, the buzzer informs about the fact and urges the time of replacement
of bobbin thread.
1) Press the reset switch to return the display of bobbin thread counter to the initial set value.
(1) thread trimming counter
