SECTION
PAGE
2 - 14
1
(A)
( 1 )
( 2 )
( 3 )
( 4 )
2 - 14 Presser Foot Height
Checking:
1. Lower feed dog below the needle plate.
2. Lift up presser foot lever.
3. Check and see if clearance (A) between needle plate and presser foot is 5.5
- 6.0 mm.
Adjustment:
1. Remove face cover.
If access to adjustment point is difficult, remove screw (1) and lamp holder.
2. Loosen screw (3) of presser bar clamp (2) and adjust the height by vertically
sliding presser bar(4).
3. Tighten screw (3) securely after adjustment keeping alignment of the foot
against feed dog.
Содержание HZL-35Z
Страница 1: ...SEWING MACHINE HZL 35Z SERVICE MANUAL ...