SECTION
PAGE
a
a
( 1 )
( 2 )
2 - 2
1
2 - 2 Needle Position at Straight Stitching
Checking:
1. Remove presser foot.
2. Set machine for straight stitching at center needle position.
3. Turning hand wheel by hand, lower the needle and check if needle point
comes to the center of needle plate hole.
Adjustment:
1. Remove face cover.
2. Loosen screw (1).
3. Turning eccentric pin (2), adjust needle position.
4. Tighten screw (1) after adjustment.
Straight stitching
Содержание HZL-35Z
Страница 1: ...SEWING MACHINE HZL 35Z SERVICE MANUAL ...