SECTION
PAGE
2 - 15
1
15.4
0.3
2 - 15 Needle Height
NOTE: After adjustment, follow "2 - 20 Replacement of needle hole threader lever".
Checking:
1. Remove presser foot.
2. Set machine for straight stitch at center needle position.
3. Check to see if the distance between needle point and needle plate surface
is about 15.1 - 15.7 mm.
Adjustment:
1. Remove face plate.
2. Loosen screw (2) of needle bar clamp (1).
3. Vertically sliding needle bar, correct the needle height.
4. Tighten screw (2) securely checking nedle hole direction after adjustment.
( 2 )
( 2 )
( 1 )
Содержание HZL-35Z
Страница 1: ...SEWING MACHINE HZL 35Z SERVICE MANUAL ...