SECTION
PAGE
a
b
a < b
a
b
a
b
a
b
a > b
( 1 )
2 - 3
1
2 - 3 Needle Position at Zigzag Stitching
NOTE: This adjustment is only for model with stitch width control.
Before checking, follow 2 - 2 "Needle position at straight stitching".
Checking:
1. Remove presser foot.
2. Set stitch width control at the maximum position and stitch selector at zigzag
stitch.
3. Turn hand wheel by hand and see if needle leaves the same clearance at
both right and left end of needle plate hole.
Fig. 1
Fig. 1
Fig. 1
Adjustment:
1. Remove back cover.
2. Turn screw (1) in either direction to correct the condition.
Содержание HZL-35Z
Страница 1: ...SEWING MACHINE HZL 35Z SERVICE MANUAL ...