SECTION
PAGE
2 - 19
1
( 1 )
2 - 19 Belt Tension
NOTE: Belt tension should be adjusted in case of belt jumping on heavy
material sewing or slow rotation.
Reference:
* Belt is bent about 7mm when it is pushed by pressure of 200g between upper
shaft and motor.
* If tension is too tight, machine may not stop smoothly.
* If tension is too loose, safety stop function (belt slippage) may not work.
Adjustment:
1. Remove front cover.
2. Loosen two screws (1). Adjust belt tension by moving motor and tighten
screws (1).
Pressure
120 V
( 1 )
230 V
Содержание HZL-35Z
Страница 1: ...SEWING MACHINE HZL 35Z SERVICE MANUAL ...