manualshive.com logo in svg

JR XP652, Инструкция по эксплуатации

Поделиться
Скачать
JR XP652 Скачать руководство пользователя страница 82

1.   Press the CHANNEL button once until MIX A 

appears, with the mixing value located at the 
bottom of the screen.

2.   To set the slave channels mixing valve, move and 

hold the master channel control stick to the 
direction to be adjusted (up/down — left/right), 
then press the + key to add + mixing value, or the 
– key to add – mixing value (+/–125%). When the 

master channels stick is moved, the display will 
automatically show the mixing valve for the 
current stick direction. 

Note:

If a mix switch position other than ON is

selected, it will be necessary to move the selected
switch to the ON, or active, position to adjust the
mixing value. OF will appear on the screen if the
selected mixing switch is in the off position.

The purpose of the mixing offset feature is to redefine
the neutral position of the slave channel to be mixed.
Any desired position may be selected for the offset
reference point. To set the offset position, place the
master channel’s stick to the desired position and
press either the + or - keys. 

This position is now stored in the memory and its
offset value from the neutral position of the master
channel is indicated numerically on the LCD display.
Then, the mixing value at the determined offset
position is now set at 0.

1.   Press the CHANNEL button once until offset 

appears in the center of the screen.

2.   Place the master channel stick to the desired 

position of slave channel offset, then press either 
the + or - button to store.

3.   Press the MODE button once to access the stunt

trim function.

4.   To exit the Function Mode, press the MODE and 

CHANNEL buttons simultaneously.

Note: 

If a mix switch position other than ON has been

selected, it will be necessary to move the selected
switch to the ON or active position to set the offset
value. OF will appear on the screen if the selected
mixing switch is in the OFF position.

PROGRAMMABLE MIXING (A)

• 

Function Mode (continued)

7.11

MODE

ENTER

CHANNEL

0

%

A32

Press the channel button

once until MIX A and

value % appears

Press either the + or - buttons to

increase/decrease mixing valve.

CURRENT
MIXING
VALUE

INCREASE

CLEAR

MIX

+

–

DECREASE

MODE

ENTER

CHANNEL

0

A32

Press the CHANNEL

button until OFFSET

appears on the screen.

Press either the + or - buttons to

slave the offset position.

OFFSET
MIXING
VALUE

INCREASE

CLEAR

MIX

OFFSET

+

–

DECREASE

Mixing Value Adjustment

Mixing Offset Adjustment

Accessing the Offset Function

CHAPTER 7

:

FUNCTIONS 

• 

Helicopter (Function Mode) 

continued

82

XP652 MANUAL  Helicopter

Содержание XP652

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды