manualshive.com logo in svg

JR XP652, Инструкция по эксплуатации

Поделиться
Скачать
JR XP652 Скачать руководство пользователя страница 49

TRIM OFFSET MEMORY 

(continued)

7.11

6.   Move all trim levers to their center positions, then 

press the + and - buttons simultaneously to store 
the trim offsets. The screen should appear as shown:

7. Press the MODE  and CHANNEL buttons 

simultaneously to exit the function mode.

Accessing the Trim Offset Memory Function (continued)

If OVR appears on the screen when the trim levers are
moved to their center positions, this indicates that the
amount of offset trim for one or more channels is in

excess of the acceptable limits. If this situation occurs,
a mechanical adjustment of the control linkage will be
necessary.

Over Trim

MODE

ENTER

CHANNEL

TR

M

Press the + or - buttons

simultaneously to store the

trim offset.

OFFSET FUNCTION
MEMORIZED/
COMPLETE

INCREASE

CLEAR

OFFSET

+

–

DECREASE

C.

--

O

V

R

TRIM VALUE EXCEEDS
ACCEPTABLE LIMITS (over)
LINKAGE ADJUSTMENT
NECCESSARY

OFFSET

This feature is useful if you wish to clear all trim offset
stored within the XP652’s memory without affecting
the data stored for other functions. The most common
use for this feature is if you have disassembled/

repaired your model and would like to return all
servos/trims to their “true neutral” positions before
linkage installation/initial test flights.

Clearing Trim Offset Memory

49

XP652 MANUAL  Airplane

Содержание XP652

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды