manualshive.com logo in svg

JR XP652, Инструкция по эксплуатации

Поделиться
Скачать
JR XP652 Скачать руководство пользователя страница 44

CHAPTER 7

:

FUNCTIONS 

• 

Airplane  

continued

44

XP652 MANUAL  Airplane

When the flaps are deployed, most airplanes exhibit
pitching tendencies (most pitch nose up). Elevator
offset trim is designed to prevent this pitching. Flap
to elevator offset trim automatically retrims the

elevator to a preset value when the flap switch is
activated.

Note:

Flap to elevator offset trim is also useful as a

dual elevator trim even for airplanes without flaps.
This is especially helpful for sailplanes that require
one trim setting for launch and another trim setting for
flight.

1. Turn on the transmitter.
2. Press the MODE and CHANNEL buttons 

simultaneously to enter the function mode.

3. Press the MODE button until OFFSET F-E appears

on the screen.

4. Press the INCREASE or DECREASE button to set

the desired amount and direction of the elevator
offset. 

Note: 

It is helpful to have the flap switch on when

making this adjustment.

5. Press the MODE button to access the

programmable mix function.

6. To exit, press the MODE and CHANNEL buttons

simultaneously.

Accessing the Flap to Elevator Offset Trim Function

FLAP TO ELEVATOR OFFSET TRIM

• 

Function Mode

7.9

OFFSET

F - E

0

ELEVATOR OFFSET VALUE (

±

125)

INDICATES FLAP TO ELEVATOR
OFFSET TRIM FUNCTION

–

+

MODE

ENTER

CHANNEL

INCREASE

CLEAR

DECREASE

Press the INCREASE or DECREASE

button to adjust the flap elevator 

offset value.

Press the MODE button 

until OFFSET F-E appears 

on the screen.

Содержание XP652

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды