JR XP652 Скачать руководство пользователя страница 64

Страница: 64 / 96

CHAPTER 6

FUNCTIONS

•

Helicopter

continued

XP652 MANUAL Helicopter

1. Press the MODE and CHANNEL buttons

simultaneously and hold.

2. Turn on the transmitter to enter the System Mode.
3. Press the MODE button until AC1 appears on the

screen.

4. Press the INCREASE or DECREASE buttons to

select the correct letter/number for the first

character (flashing).

5. To adjust the remaining 2 characters, press the

CHANNEL button until the desired character to be
adjusted is flashing.

6. Press the MODE button to access the Modulation

Select Function.

7. To exit, press the MODE and CHANNEL buttons

simultaneously.

Accessing the Model Name Entry Function

The XP652 allows a 3 digit name to be input for
each of the five (5) models available. The
current model will be displayed in the normal

display. This feature is useful to help identify
different aircraft types, or model setups.

MODEL NAME ENTRY

•

System Mode

6.6

MODE

ENTER

CHANNEL

Press the CHANNEL button
to select the character to be

changed (flashing).

Press the INCREASE or

DECREASE buttons to select the

desired character (A-Z, 1-9, etc.)

HEI

Press the MODE button

until HE appears on the

screen.

INCREASE

CLEAR

–

DECREASE

FLASHING INDICATES

CHARACTER TO BE ADJUSTED

CURRENT MODEL NUMBER

Содержание XP652

































































































Результаты поиска

Содержание XP652

Отзывы:

Бренды по названию

Популярные бренды

JR XP652, Инструкция по эксплуатации

Результаты поиска

Содержание XP652

Отзывы:

Бренды по названию

Популярные бренды