manualshive.com logo in svg

JR XP652, Инструкция по эксплуатации

Поделиться
Скачать
JR XP652 Скачать руководство пользователя страница 38

38

XP652 MANUAL  Airplane

CHAPTER 7

:

FUNCTIONS 

• 

Airplane  

continued

The amount of servo travel is adjustable for each
direction for each of the 6 channels individually.
The adjustment range is from 0% to 150%. Travel
adjustment is factory set at 100% for all channels.

The travel adjustment value displayed on the screen

depends on the position of the stick or switch (e.g.,
flap switch, gear switch). This function is useful either
to maximize control surface travel, or to reduce travel
to eliminate servo binding without the need for
mechanical adjustment.

1. Turn on the transmitter.
2. Press the MODE and CHANNEL buttons 

simultaneously to enter the function mode.

3. Press the MODE button until TRV ADJ. appears on

the screen.

4. Press the CHANNEL button until the desired

channel appears on the screen.

5. Move the selected channel stick or switch in the

direction that you want to adjust the travel. Press

the INCREASE or DECREASE button to achieve the
desired travel. Move the stick in the opposite
direction to adjust the travel in the opposite
direction.

6. The same may be done for all channels.
7. Press the MODE button to access the aileron to

rudder mixing function.

8. To exit, press the MODE and CHANNEL buttons

simultaneously.

TRV ADJ.

T H R

+I00

%

THR : THROTTLE
AIL : AILERON
ELE : ELEVATOR
RUD : RUDDER
GER : LANDING GEAR
FLP : FLAP (AC ONLY)

CHANNEL

1
2
3
4
5
6

INDICATES THE TRAVEL
ADJUSTMENT FUNCTION

TRAVEL ADJUSTMENT VALUE

SERVO OPERATING DIRECTION

–

+

MODE

ENTER

CHANNEL

INCREASE

CLEAR

DECREASE

Press the INCREASE or DECREASE

button to adjust the travel adjustment value.

Press the

MODE button

until TRV ADJ.

appears on
the screen.

Press the

CHANNEL button

until the desired

channel appears

on the screen.

Accessing the Travel Adjustment Function

TRAVEL ADJUSTMENT

• 

Function Mode

7.5

Содержание XP652

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды