manualshive.com logo in svg

JR XP652, Инструкция по эксплуатации

Поделиться
Скачать
JR XP652 Скачать руководство пользователя страница 37

Accessing the Sub-Trim Function

SB-TRIM

T H R

0

THR : THROTTLE
AIL : AILERON
ELE : ELEVATOR
RUD : RUDDER
GER : LANDING GEAR
FLP : FLAP (AC ONLY)

CHANNEL

1
2
3
4
5
6

INDICATES THE 
SUB -TRIM FUNCTION

SUB -TRIM VALUE (

±

125)

–

+

MODE

ENTER

CHANNEL

INCREASE

CLEAR

DECREASE

Press the INCREASE or DECREASE

button to adjust the sub -trim value.

Press the

MODE button

until SB -TRIM

appears on
the screen.

Press the

CHANNEL button

until the desired

channel appears

on the screen.

Sub-trim is an electronic trim that is available for
each of the 6 channels. Sub-trim is particularly
useful as it allows the mechanical trim levers to be
returned to their neutral positions by adjusting

/changing the servo’s neutral position electronically,
without the need to mechanically adjust the specific
control linkage. This allows the same mechanical trim
lever settings between the four models you can control

with this radio system. Sub-trim can also allow
additional trim travel when mechanical trims do not
provide enough movement.

Note:

It is recommended to use as little subtrim as

possible for adjustment. If more that 20-30 points are
required, is it suggested that a mechanical linkage
adjustment be performed.

1. Turn on the transmitter.
2. Press the MODE and CHANNEL buttons 

simultaneously to enter the function mode.

3. Press the MODE button until SB-Trim appears on

the screen.

4. Press the CHANNEL button until the desired

channel appears on the screen.

5. Press the INCREASE or DECREASE button to

establish the desired amount of sub-trim.

6. Press the MODE button to access the travel

adjustment function.

7. To exit, press the MODE and CHANNEL buttons

simultaneously.

SUB-TRIM

• 

Function Mode

7.4

37

XP652 MANUAL  Airplane

subtrim

Содержание XP652

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды