manualshive.com logo in svg

JR XP652, Инструкция по эксплуатации

Поделиться
Скачать
JR XP652 Скачать руководство пользователя страница 79

Accessing the Rudder Offset Function

–

+

MODE

ENTER

CHANNEL

INCREASE

CLEAR

DECREASE

Press the

INCREASE

button to adjust

the left offset

value.

Press the

DECREASE

button to adjust

the right offset

value.

Press the MODE

button until RVU

appears on the

screen.

Press the

CHANNEL button

until HLD appears

on the screen.

RUDDER OFFSET POSITION
(MAXIMUM 

±

125)

OFFSET

H LD

0

INDICATES THE RUDDER
OFFSET FUNCTION

Press the INCREASE and

DECREASE buttons simultaneously to

reset the rudder offset value.

When the throttle hold switch is on (during
autorotations), the revolution mixing feature
becomes inactive. The rudder offset function is
designed to automatically change the tail blade

pitch when the throttle hold switch is on, providing a

straight descent during autorotations. The adjustable
range of the rudder offset is L125 – 0 – R125. This
feature is only applicable for helicopters using a
“driven” or “limited slip” type tail rotor system during
autorotations.

1. Turn on the transmitter.
2. Press the MODE and CHANNEL buttons

simultaneously to enter the function mode.

3. Press the MODE button until RVU appears on the

screen.

4. Press the CHANNEL button until HLD appears on

the screen.

5. From the 0 offset, press the DECREASE button to

enter a right offset value or the INCREASE button
to enter a left offset value. To reset the rudder
offset value, press the INCREASE and DECREASE
buttons simultaneously.

6. Press the MODE button to access the program mix

A  function.

7. To exit, press the MODE and CHANNEL buttons

simultaneously.

RUDDER OFFSET

• 

Function Mode

7.10

79

XP652 MANUAL  Helicopter

CHAPTER 7

:

FUNCTIONS 

• 

Helicopter (Function Mode) 

continued

Содержание XP652

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды