manualshive.com logo in svg

JR XP652, Инструкция по эксплуатации

Поделиться
Скачать
JR XP652 Скачать руководство пользователя страница 29

1.    Press the MODE and CHANNEL buttons

simultaneously and hold.

2.    Turn on the transmitter to enter the System Mode.
3.    Press the MODE button until PPM appears on the 

screen.

4.    Press either the INCREASE or DECREASE buttons 

to change the modulation to the desired setting 
FM (PPM), Z-PCM (ZPC) or S-PCM (SPC).

5.    Press the MODE button to access the Model Type 

Function.

6.    To exit, press the MODE and CHANNEL buttons

simultaneously.

Accessing the Modulation Select Function

MODE

ENTER

CHANNEL

Press the INCREASE or

DECREASE buttons to select

the desired modulation.

Note: The modulation for the current model in use can be viewed at a
glance by pressing the mode button with the system in the normal
screen position.

CURRENT
MODULATION TYPE

I

Press the MODE button

until PPM appears.

INCREASE

CLEAR

+

–

DECREASE

CURRENT MODEL
NUMBER

MODULATION TYPES
PPM (FM)
SPC–SPCM
ZPC–ZPCM

The modulation select function enables your XP652
to transmit to a variety of JR receivers that are
already, or may soon be, in existence. You can
select from either PPM (FM), Z-PCM or S-PCM,

depending on the central processing unit within your
receiver to utilize existing receivers, or to upgrade your
XP652 flight pack for future models. Your system
comes factory preset in the FM or PPM (Pulse Position
Modulation) position so that it is compatible with the
included R600 FM receiver.

Please refer to the receiver compatibility chart below
when selecting the modulation type for various JR
receivers.

Note: 

Once the proper modulation has been selected

for a specific model number, the modulation type will
remain the same for that model number, even during
model number/type changes. In other words, if you
have one model on FM/PPM and one model on PCM,
the system will automatically change modulation types
once the correct modulation has been selected for that
model.

MODULATION SELECT

• 

System Mode

6.7

Tx  Modulation

Compatible Receivers  

# of Channels & 
Brief Description

PPM (FM)

NER-226

6 (micro)

PPM (FM)

NER-228

8

PPM (FM) 

NER-327x

7

PPM (FM)

NER-527x

7 (micro)

PPM (FM)

NER-529x

9 (micro)

PPM (FM)

NER-549

9

PPM (FM)

NER-600

6 (micro)

Tx  Modulation

Compatible Receivers  

# of Channels & 
Brief Description

Z-PCM

NER-236

6 (micro)

Z-PCM

NER-627XZ or
627 “G” series

7

Z-PCM

NER-J329P

9

Z-PCM

NER-910XZ

10

S-PCM

NER-D940S

10

S-PCM

NER-649S

9

S-PCM

NER-950S

10

29

XP652 MANUAL  Airplane

* Note: 

If either S-PCM or Z-PCM modulation is selected, pressing

the MODE button will access the fail-safe/hold function.

Содержание XP652

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды