Joyner JNSZ1600DL, Руководство пользователя

Страница: 89 / 138

98
(3). Carburetor fuel level too low or Check and adjust float chamber needle valve mixture
too lean
(4). Carburetor measuring orifice blocked or Clean float chamber watery
(5). Spark plug overheated or too much carbon deposits Adjust and service
(6). Intake valve sealing not well Check and service
(7). Intake manifold or connecting hose vacuum leakage Check and service
14. Oil pressure warning light is illuminated during engine running.
Cause Correction
(1). Engine oil level too low or not correct Fill in engine oil or apply correct engine oil
(2). Oil pressure warning light woks abnormally Replace Oil pressure warning light
(3). Engine temperature too high See No. 17.
(4). Engine bearing or fuel pump worn out Check, service or replace
(5). Fuel pump relief valve binding or spring deformed Check or replace
(6). Oil collector blocked or loose Clean or replace or tighten
15. Engine self ignited.
Cause Correction
(1). Too high idle speed, too lean mixture or Adjust idle speed or fast idle boost fast idle gear out of work
(2). Incorrect fuel grade Use fuel of correct grade
(3). Too much carbon deposits in Spark plug or combustion chamber Clean carbon deposits
(4). Idle cut-off valve not works or circuit trouble Service or replace
(5). Choke and throttle valve out of work Check relevant connecting
mechanism
16. Engine noise.
(1). Preignition or knocking occurs during accelerating or under heavy load
Cause Correction
a. Incorrect ignition timing Check ‘teeth’belt tension, tension pulley or distributor
b. Incorrect fuel grade Use fuel of correct grade
c. Intake manifold or connecting hose vacuum leakage Check and service
d. Too much carbon deposits in Spark plug or combus
tion chamber carbon severely Clean carbon deposits