Joyner JNSZ1600DL, Руководство пользователя

Страница: 72 / 138

81
The exhaust system of the carburetor engine 480 includes Exhaust Manifold, Heat Insulation Cover,
Exhaust Hose, Front Muffler, Rear Muffler.
2. Description for the Exhaust System of Engine 2.480M:
Fig.127 intake and exhaust system schematic drawing of engine 480M
The Intake System of Engine 480M includes: air filter, Intake Hose, Guide Cover, Throttle Valve, Intake
Manifold, Intake air preheating hose of Positive Crankcase Ventilation
（
PCV
）
and so on. ——Air filter type
is 1GD 129 607G, and its basic parameters are as follows:
Filtering area: 100cm2 nominal air flow(L): 600
±
150 filtering
efficiency:
≥
99% filtering resistance: 2kPa
——The air filter is equipped with a intake air temperature controller. When the temperature is low, the hot
air intake valve controlled by the temperature controller will open and the hot air, flowing by the exhaust
manifold, will be directed into the air filter from the intake preheating hose to supply more hot air and
facilitate the fuel atomization during cold winter. As temperature is high, valve is shutted off and the hot air
is not permitted to enter the air filter.
——See “CAC480M Engine’s single port injection system”to know about the throttle valve. The exhaust
system of Engine 480M includes Exhaust Manifold, Heat Insulation Cover, Exhaust Hose, Oxygen Sensor,
Flexible Hose, Three-Way Catalyst Converter, Front Muffler, Rear Muffler.