Joyner JNSZ1600DL, Руководство пользователя

Страница: 85 / 138

94
(7). No engine ground wire or ground wire is disconnected Connect or replace the ground
wire
2. Engine runs but no spark exists during starting:
Cause Correction
(1). No fuel in fuel tank Fuel the tank
(2). No fuel in the carburetor float chamber Keep trying to start engine
(3). Battery is discharged (engine run slowly) Recharge or replace battery
(4). Battery wire connector is loosed or corroded Reconnects or replace battery
(5). Ignition parts is damp or damaged Replace ignition parts
(6). Ignition part harness is opened, loosed or not energized. Reconnect or replace harness
(7). Spark plug is burned away, damaged or
Spark plug gap is not correct. Replace spark plug
(8). Main mechanism is damaged (for example, camshaft) Check and service
(9). Fuel pump is damaged Replace pump
(10). Carburetor float chamber needle valve is binding
or oil strainer is blocked Check, service and clean
(11). Idle cut-off valve does not open Check circuit and solenoid
3. Difficult to start for engine when temperature is low:
Cause Correction
(1). Battery discharged Recharge battery
(2). Battery connector loosed or corroded Connect or replace the battery wires.
(3). Spark plug is corroded, damaged or the
Spark plug gap is not right. Replace spark plug
(4). Other ignition system problems Check and service
(5). Low cylinder compression pressure Sent to service spot for check and service
4. Difficult to start for engine when temperature is high:
Cause Correction
(1). Air filter is dirty or blocked Clean air filter core or replace case
(2). Low cylinder compression pressure Sent to service spot for check and service