Joyner JNSZ1600DL, Руководство пользователя

Страница: 7 / 138

6
Before you start the engine, check that the parking brake is engaged, and the gear shift
lever is in neutral. Trying to start the engine in gear may damage the starter motor, clutch or
gearbox.
Release the key at once if the engine starts. Holding the key in start position when the
engine is running will cause damage to the starter motor.
If the engine does not start after 10 seconds, a second attempt to start the engine can be
allowed. Improper operation will damage the engine.
e. Engine stop key
Important-stop key test.
Before driving this vehicle, test the Engine Stop key to assure that it is operating properly. With
the engine running, turn the key counterclockwise to the “off” position for the engine to shut down.
B. Pre-Drive Inspection
Perform this pre-drive inspection everyday before driving vehicle. If not performed,
serious damage to the vehicle or personal injury may result.
1. Check for Engine Oil Level. Check for transmission Oil Level. Check for leaks, add oil if required.
2. Check the coolant. Check for leaks, add the coolant if required.
3. Check for Fuel Level. Add fuel as necessary and do not overfill. Check for leaks.
4. Check for Brakes. Depress the brake pedal several times, and then check for proper brake pedal free
play. Make sure there is no brake fluid leakage. Adjust if necessary.
5.
Check the clutch cable, Assure the cable snaps back and has a smooth operation. Ensure the clutch
can operate smoothly. Adjust if necessary, or replace the clutch if necessary.
6.
Check Tires. Check tires condition and pressure. The pressure on both Front and Rear tire is 16psi.
7. Check Throttle. Check for smooth operation. Ensure the throttle “snaps” back to idle.
8. Check Engine Stop key. Perform engine stop key test. Repair as necessary.
9. Check all Nuts, Bolts, and fasteners. Check wheels to see that all axle nuts and lug nuts are
tightened properly. Check and tighten as necessary all other fasteners to specified torque.
10.
Check Roll Cage Bars. Ensure all protective roll cage bars are in place before operating the ATV.