Joyner JNSZ1600DL, Руководство пользователя

Страница: 84 / 138

93
6. High tension ignition wire assembly:
The high tension ignition wire assembly is mounted on the cylinder wire bracket which is installed on
the valve cover, also cylinder wire and coil wire clips exist between the distributor
Fig.156
Fig.157 Fig.158
Carburetor engine faults, causes and corrections
1. Engine does not run during starting:
Cause Correction
(1). Battery wires are loose or corroded Reconnect or replace the wires
(2). Battery is discharged or damaged Recharge or replace the battery
(3). Starter circuits is opened or loosed or not energized Energize or replace the harness
(4). Starter solenoid valve or switch is damaged Replace starter solenoid valve or switch
(5). Starter is damaged Replace starter
(6). Flywheel gear ring or starter pinion is loosed or damaged Replace flywheel gear ring or
starter