FIVESEVEN DESIGNS Prodigy SC Mod, Инструкция по эксплуатации

Страница: 1 / 7

Prodigy SC Mod
Instruction Manual
Needed Tools

1/16”, 3/32” & 5/64” Allen Drivers

3/16”, 1/4” & 11/32” Hex Drivers or sockets

Hobby knife

Emery board, needle files or fine sandpaper

1/8” Reamer, (drill will work)

Shock or other non-marring pliers

Synthetic grease

Silicone shock oil (30 wt. recommended)
Optional Parts

Sealed gear differential case for Traxxis 2 WD
Bag A (you will also need the main chassis plate and front shock towers in this step)

Attach 30* nose plate to chassis using (2) 8-32x5/8” & 1 8-32x1/4” FHS. The longer screws go in the two holes toward the
front of the car and will protrude through the nose plate.

Attach front bulkhead to nose plate using (4) 8-32x7/16” FHS

Attach the front shock tower to the nose plate using (4) 4-40x5/16” BHS

Find (2) front suspension arms, (2) 1.52” inner hinge pins and (4) e-clips. Ream the inner and outer hinge pin holes in the sus-
pension arms & the hinge pin holes in the front bulkhead with a .125” reamer. The parts should move freely after assembly.

Using (2) 8-32x7/16” FHS, mount the front bumper mount to the nose plate