The third press of Cal Mode button enters auto clean day setting mode with the following
display. See section 8.4.4.
PRESS UP/DWN KEYS
FOR DESIRED CAL
PRESS ENTER TO SET
AUTO CLEAN DAYS
The fourth press of Cal Mode button enters the sensor calibration offset mode with the
following display. See section 8.4.5.
PRESS UP/DWN KEYS
FOR DESIRED CAL
PRESS ENTER TO
SET CAL OFFSET
The fifth press of Cal Mode button enters the clean cycle limit mode with the following
display. See section 8.4.6.
PRESS UP/DWN KEYS
FOR DESIRED CAL PRESS
ENTER TO SET
CC CYCLE LIMIT
The sixth press of the Cal Mode button prompts to enter the pump run time entry with
the following display. See section 8.4.7.
PRESS UP/DWN KEYS
FOR DESIRED CAL
PRESS ENTER TO SET
LONG TERM AVERAGING
The seventh press of the Cal Mode button prompts to enter the pump run time entry with
the following display. See section 8.4.8.
PRESS UP/DWN KEYS
FOR DESIRED CAL
PRESS ENTER TO SET
PUMP TIME ON
Pressing the Cal Mode button again will restart this sequence at the time and date entry.
This sequence of menu displays can also be scrolled through in reverse order by using
the CC Rate button.
8.4.2 SET TIME/DATE
USE UP AND DWN KEYS
TO SET HOUR, PRESS
ENTER WHEN SET.
HOUR: XX
GI-2000 Manual V2.3
Page
29
