Table 1
Test Functions
Time and Date Entry -
Allows maintenance personnel to set the time
and date
Heater Test -
Allows maintenance personnel the ability to
turn the power on and off to the heater
Pump Test -
Allows maintenance personnel the ability to
turn the power on and off to the pump
Temp Switch Test -
Allows maintenance personnel the ability to
check the status of the temperature switch.
Water Level Test -
Allows maintenance personnel the ability to
display the water level the controller is
currently calculating.
Display & LED Test-
Exercises the LCD display and LED indicators
for proper operation.
8.1.2 CONTROLS, DISPAYS AND INDICATORS
The following controls, displays and indicators are available on the GI-2000 Controller:
External Controls
The external controls on the controller enclosure available to the operator are
summarized in Table 2:
Table 2
External Controls
Auto/Manual Mode Switches -
Allows the operator to select between
automatic clean cycle operation and manual
clean cycle operation.
Manual Mode Start/Stop Switch -
Allows the operator to start the manual clean
cycle operation.
GI-2000 Manual V2.3
Page
18