AUTOMATIC CYCLE
IN PROGRESS
PUMP ON XXXXX
Note:
This display indicates the pump run time remaining in seconds.
AUTOMATIC CLEAN
CYCLE COMPLETE
d)
The unit will not run another clean cycle within for 12 hours unless the clean cycle
limit has been disabled (see Section 8.4). The unit display will cycle to the main
automatic display mode.
Note
: Disabling the clean cycle limit is intended to allow for a second automatic clean
cycle occur within 12 hours. Caution should be observed when disabling the clean cycle
limit.
e)
The unit will display the following message is the user presses Start/Stop button at
any point in the clean cycle to interrupt the cycle. The restart time is seconds is
displayed.
AUTOMATIC CYCLE HALT
PRESS START/STOP
TO RESTART –OR-
XXXXX SEC TO RESTART
GI-2000 Manual V2.3
Page
25
