50
08.5
TIPS FOR THE USER
•
If condensation appears inside the boiler, the causes could be:
- The heat pump is set too low (recommended minimum threshold 60°- 65°)
-
Poor draught by the flue (clean the flue)
-
Insufficient comburent air (check comburent air conduit)
•
I If the glass becomes very dirty (with visible blackening) while operating, the possible causes could be:
-
Low draught by the flue (clean the flue or check its characteristics)
-
Insufficient comburent air (add more air with the combustion fan, clean the air intake)
• Check for obstructions in the flue and in the external air intake before starting the machine after a prolonged period of disuse.
•
When the boiler is not used for a long period of time (spring-summer period) it is necessary to completely empty the tank, the
auger and the basket using a vacuum cleaner, then carefully clean to prevent the residual pellets from clogging and subsequently
damaging the components.
•
Every 500-1000 kg of pellets loaded into the container, check that there are no deposits of sawdust on the bottom, and remove
any sawdust there. Sawdust reduces the auger’s capacity and creates functional problems for the appliance.
•
The pellets must be fed into the hopper using a scoop. Do not empty the sack directly into the hopper.
• The fireplace must be closed to prevent smoke from escaping.
•
The pellet hatch must be closed while the machine is running.
• Prompt and systematic maintenance is a fundamental component for perfect functioning and continuous maximum heat efficiency.
•
Once a year, the specialised Technical Service Center has to clean any possible limescale on the boiler (see CHAP.08.7 -
SCHEDULED PREVENTIVE MAINTENANCE
).
MORE CLEANING = HIGHER PERFORMANCE
The pellet container should be loaded with the stove off since, having an airtight lid with safety micro switch, the
stove is turned off whenever the door is opened for over 30 minutes.
WARNING
Содержание MEC 21-18 kW
Страница 59: ...ENGLISH NOTE 59...
