background image

44

The page displays the status of the inputs if the 

areas module is present.

The page displays the status of the device to control 

the flow (not enabled).

The page displays the name of the file for 

programming the electronic board.

The page displays the set plant scheme.

The page displays the name of the active database.

MENU 08 - BOILER STATUS

The pages in the MENU 08 BOILER STATE consent to control the operating parameters of the boiler. Press key 2 to access the Menu 

Pages, use keys 3 or 4 to navigate through the various pages and key 1 to exit at the end.

The page displays the boiler water temperature and 

pressure as well as the heater water temperature (if 

scheme 6 is set) or the buffer water temperature (if 

scheme 5 is set).

The page displays the room temperature, the outside 

temperature (not enabled), the pellets temperature 

and temperature of the electronic card.

The page displays the fume temperature, the 

exhaust fan speed, the actual operating power, the 

auger loading duration and operating status.

2

1

4

4

4

4

4

4

4

3

3

3

3

3

3

3

1

1

1

1

1

1

1

Содержание MEC 21-18 kW





























































Отзывы: