Jolimark bp-900kll, Руководство пользователя

Страница: 39 / 76

BP-900KII User's Manual
- 33 -
When the printer in online mode, load paper and then press ▲ LF/FF for 3 seconds, and the printer
LEDs of the power and online on the control panel blink by turns.
Press “ LF/FF ▲ ”, “ LOAD/EJECT ▼ ” can change the setting of TOF (The max dimension of the
changing of TOF is measure by the default setting under zero position):
“
LF/FF ▲ ” Press one time go forward 1/60 inch, max is 60/60 inch.
“ LOAD/EJECT ▼ ” Press one time go backward 1/60 inch, max is 30/60 inch.
After adjustment, press ONLINE button to save and exit TOP adjustment mode, the power light and
the online light blink 3 times at the same time with two beeps.
4.6 The Self Test Functions
4.6.1 ASCII Self Test
Press Online button when turning on the printer. The printer would print out a piece of ASCII pattern.
If you press Online and LOAD/EJECT buttons at the same time when turning on the printer, it would
print out the ASCII pattern continuously. Press Online button to pause it. If you want to exit now, you
can turn off the power then turn on again.
4.6.2 Hex Mode
Press LOAD/EJECT button when turning on the printer to enter the Hex printing mode. After enter the
Hex printing mode, the printer would print out the data in hex which send from the computer. Use the
Hex printing mode we can check the trouble of interface. If you run the following program, you can get
the printing result relatively.
For example, printer prints out the following hex codes:
Here, one line of “A~Z” italic characters is printed out firstly, and then print out one line of “A~Z”
characters.
The following is the printing result of normal mode:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
ABCDEFGHIJKLMNOPQRSTUVWXYZ
4.6.3 Head Pin Test
Press High speed button while turning on the power of the printer. The printer would print out a piece
of “Head pin test” pattern.
24 pins print out 24 lines which are marked with 1~24. If the line after some number can not be printed
out, it denotes that pin is broken. And you set the break pin number in the corresponding menu setup,
Figure 4-3 ASCII self test mode
Figure 4-4 Hexadecimal mode
ASCII SELF TEST MODE
٩٠٠ KII v XXX XXXX/XX/XX SN:XXXXXXXXXXXXXXXXXXXX
!"#$%&’( )*+-./ ٠١٢٣۴۵۶٧٨٩ :;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`ab
!"#$%&'( )*+-./ ٠١٢٣۴۵۶٧٨٩ :;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abc
"#$%&'( )*+-./ ٠١٢٣۴۵۶٧٨٩ :;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcd
*****
HEXADECIMAL DUMP
*****
(0000) ١ B ٣۴ ۴١ ۴٢ ۴٣ ۴۴ ۴۵ ۴۶ ۴٧ ۴٨ ۴٩ ۴ A ۴ B ۴ C ۴ D ۴ E , ۴ ABCDEFGHIJKLMN
(0010) ۴ F ۵٠ ۵١ ۵٢ ۵٣ ۵۴ ۵۵ ۵۶ ۵٧ ۵٨ ۵٩ ۵ A ٠ D ٠ A ١ B ٣۵ OPQRSTUVWXYZ,,, ۵
(0020) ۴١ ۴٢ ۴٣ ۴۴ ۴۵ ۴۶ ۴٧ ۴٨ ۴٩ ۴ A ۴ B ۴ C ۴ D ۴ E ۴ F ۵٠ ABCDEFGHIJKLMNOP
(0030) ۵١ ۵٢ ۵٣ ۵۴ ۵۵ ۵۶ ۵٧ ۵٨ ۵٩ ٠ D ٠ A QRSTUVWXYZ,