Jolimark bp-900kll, Руководство пользователя

Страница: 14 / 76

BP-900KII User's Manual
- 8 -
3. Take out the ribbon from the package, push the ribbon guide backwards as the arrow shown to
divide the ribbon cartridge from the ribbon guide. Place the ribbon with ribbon knob upwards, turn
the ribbon knob as the arrow shown to tighten the ribbon, so that it is easier to install.
4. Aim the buckles on both sides of ribbon cartridge at the mounting slots of the upper frame, lock the
bottom buckle into the mounting slot as arrow shown, and then lock the upper buckle into the
①
mounting slot as arrow show
②
n, make sure it is fix tightly.
Note: If you meet resistance when pushing the cartridge, please turn the ribbon knob, and
then push it to the proper position.
5. Move the ribbon guide right below the print head, the two projections of ribbon guide should aim at
the two mounting slot, and then lift up the ribbon guide upwards forcibly to lock the projections lock
into the mounting slots of carriage. Make sure it is fixed tightly.
Figure 2-12 Installing the ribbon cartridge
Figure 2-11 Ribbon cartridge
Figure 2-10 Lock the upper frame
Ribbon knob
Ribbon
Ribbon cartridge
(JMR128/JMR131)
Ribbon guide
②
①