Jolimark bp-900kll, Руководство пользователя

Страница: 34 / 76

BP-900KII User's Manual
- 28 -
As the right picture shows, the option with a “ √ ” is the current default setting of PRT-SPEED.
4) Press “ ▲ ” button, “ ▼ ” button to select the options up and down.
For example, if you need to change the speed to “High 2”, you can press “ ▲ ” and “ ▼ ” to choose,
then press “ ► II ” to save your selection. The saved option would be marked with a “ √ ”. (As shown
below)
5) Press “ HIGH SPEED ◄ ” button to go back to main menu, then press “ HIGH SPEED ◄ ” button
again to exit the menu setup mode and the new settings would take effect at the same time. (As
shown below)
4.4.2 Printing the Current Setting Report
If you need to know current setting, you can print the current setting report as the following steps:
1. Turn off the printer.
2. Hold down both
LOAD/EJECT button and LF/FF button while turning on the printer. Load the paper,
the printer would print out the current setting report as Figure 4-2 shown.
► II
PRN SPEED
3. HIGH 2
PRN SPEED
3. HIGH 2
√
◄
BP-900KII
PAPER: CUT SHEET
◄
PRN SPEED
3. HIGH 2
√
MENU SETUP
1. PRN SPEED ►