Jolimark bp-900kll, Руководство пользователя

Страница: 10 / 76

BP-900KII User's Manual
- 4 -
2.3 Main Parts of the Printer
Figure 2-3 and Figure 2-4 show the main part names of printer.
Note: Please take the specific interface as standard.
2.4 Installing the Printer
2.4.1 Choose Proper Installing Place
When choosing the installing place please consider following guide:
1. The laying place must be plane and fixing.
2. Keep it far from the device which has electric field disturb and voltage change are large, such as the
duplicating machine or air condition, do not plug them in the same electrical outlet.
3. Do not use in locations subject to high humidity or dust levels. Or else, it may damage the operation
components or lead to circuit malfunction.
4. Do not place the printer where overheating, shaking, humidity or direct sunlight.
5. Make sure the ventilation is good around the printer.
Figure 2-3 Main parts of the printer (Front view)
Figure 2-4 Main parts of the printer (rear view)
Upper cover
Upper frame lever
Print head
Control panel
Ribbon cartridge
(JMR128/JMR131)
Carriage shaft
Power switch
Ribbon guide
USB interface
Parallel interface
USB interface
Power supply inlet
Ethernet interface
Serial interface
Serial interface