Jolimark bp-900kll, Руководство пользователя

Страница: 16 / 76

BP-900KII User's Manual
- 10 -
2.5 Connecting to Your Computer
The printer can be configured with parallel interface, USB interface, serial interface or Ethernet
interface (Please take the specific interface as standard.). Please connect your computer and the
printer with respective interface cable. (As Figure 2-15, 2-16, 2-17, 2-18 shown)
Note: Before connecting the parallel interface or serial interface, please make sure the power of
the printer is shut down. Only if you had tightened the cable you may turn on the power,
or it would damage the printer.
2.5.1 Connecting the Parallel Cable
1. Turn off both the computer and the printer. Plug the parallel cable connector securely into the
printer’s parallel interface. Squeeze the wire clips together until they lock in place on either side of
the connector. (As shown in Figure 2-15)
2. Plug the other end of the cable into the computer’s parallel interface; then tighten the screws on
either side of the connector.
2.5.2 Connecting the USB Cable
1. Plug the USB cable A end (flat shape) into the computer's USB interface.
2. Plug the USB cable B end (square shape) into the printer's USB interface. (As Figure 2-16 shown)
Note: Please don’t impact the USB interface cable after connecting it.
2.5.3 Connecting the Serial Cable
1. Turn off both the computer and the printer. Plug the serial cable connector securely into the printer’s
serial interface. Then tighten the screws on either side of the connector. (As Figure 2-17 shown)
2. Plug the other end of the cable into the computer’s serial interface; then tighten the screws on either
side of the connector.
Figure 2-15 Connecting the parallel cable
Figure 2-16 Connecting the USB cable
Parallel interface Parallel cable
Wire clips
USB cable
USB interface