Johnson Horizon Fitness 7.0AT-04, Руководство по обслуживанию

Страница: 16 / 50

CHAPTER 3: CONSOLE INSTRUCTION
WHEN UNIT IS POWERED OFF THEN BACK ON
If you turn your treadmill or elliptical unit off, or if it goes into sleep mode, the next time it is powered on
the unit will look to pair with the last music device with which it was paired. It will automatically pair at
this time.
RE-PAIRING MUSIC DEVICES
In the event that the unit cannot find the last paired music device (for example, the music device is off or
not being used) then the unit will stop looking to pair with the music device. If this happens, and if you
wish to use your music device again, then you will need to go through the pairing process listed above
and re-pair through your music device’s settings.
USING MULTIPLE MUSIC DEVICES
If multiple devices are being paired with the unit (i.e.: multiple users are using the treadmill or elliptical
unit and pairing their music devices with it) then the unit will look to pair with the last device used and
“forget” other devices. If you wish to re-pair a “forgotten” music device, then you will need to un-pair the
current paired device and then re-pair your device through the pairing procedure noted above.
CONNECTING VIA AN AUDIO CABLE
1) Connect the included AUDIO ADAPTOR CABLE to the AUDIO IN JACK on the top right of the console
and the headphone jack on your media device.
2) Use your media device buttons to adjust song settings.
3) Remove the AUDIO ADAPTOR CABLE when not in use.
4) If you don’t want to use the SPEAKERS, you can plug your headphones into the AUDIO OUT JACK at
the bottom of the console. This ensures that if you accidentally catch the headphone line while running,
you won’t drop your device to the ground.
HORIZON CONNECTED FITNESS SYSTEM
Your Horizon machine is Bluetooth ready, allowing you to use Bluetooth 4.0 technology to wirelessly
connect your device and other apps to your Horizon treadmill. For a complete list of 3rd party fitness
apps compatible with your Horizon treadmill follow the link below: