Johnson Horizon Fitness 7.0AT-04, Руководство по обслуживанию

Страница: 40 / 50

40
CHAPTER 6: PART REPLACEMENT GUIDE
6.2 REAR ROLLER REPLACEMENT
1) Remove the 4 screws from the rear end caps, remove rear end caps.(Fig-1)
2) Remove roller adjustments bolts on both sides, approximately 4-5 turns per side until bolts
are removed. (Fig-2)
Fig-1 Fig-2 Fig-3
3) Remove the rear roller (Fig-3)
4) Reverse steps to install rear roller .
Note:
1. Be sure to set the correct running belt tension after replacing the roller.
2. Over or under tension will result in damage or injury.
For the adjusting the running belt reference section 6.6 note 2.