Johnson Horizon Fitness 7.0AT-04, Руководство по обслуживанию

Страница: 48 / 50

48
CHAPTER 6: PART REPLACEMENT GUIDE
3) Open the front of the console overlay.
4) Take photos of the UCB and wire connections so that you can reference them when
you are plugging the wires into the new board.
5) Disconnect all of the wires from the board.
6) Remove the old console overlay set and put the new one in place. Refer to your
photos to correctly reconnect the wires.
7) Plug the unit into the wall and check for proper function.
a. Check the Go button
b. Check elevation up & down
c. Verify speed up & down
d. Make sure heart rate works
e. Check the Stop button
f. Remove the safety key – the display should show that safety key is removed
8) If the unit is functioning properly, reinstall the screws in the back of the
console to secure the front window.