Johnson Horizon Fitness 7.0AT-04, Руководство по обслуживанию

Страница: 15 / 50

CHAPTER 3: CONSOLE INSTRUCTION
BLUETOOTH HEART RATE MONITORING
The 7.0AT is equipped with multi-channel Bluetooth which enables you to wirelessly connect compatible
Bluetooth heart rate monitoring devices to this treadmill. You will need to ensure that your wireless heart
rate monitoring device is Bluetooth 4.0 compatible and is also “open” to sharing data. Non-“open” or
“closed” devices typically only share data with their proprietary apps. The 7.0AT needs an “open” device
to receive data from the device. You may need to consult with your device’s owner’s manual or the
manufacturer to confirm if it is an open device.
Pair the receiver to the app and the console will receive the information from the tablet. To use the
Bluetooth HR monitor without a tablet, press and hold the Bluetooth button to enable the console to
communicate with the receiver. When paired with the Bluetooth HR monitor the console will not pair
with a tablet. To enable tablet communication press and hold the Bluetooth button for 5 seconds or reset
power.
USING YOUR MUSIC DEVICE
The 7.0AT treadmill will connect and stream music form your compatible music device. This includes many
smart phones and traditional mp3 players.
Your 7.0AT comes equipped with Bluetooth speakers. Bluetooth compatible devices can stream music
wirelessly from your device to the speakers. You can also connect your music device via an audio cable
and stream music through the speakers. Instructions for both types of audio connection are detailed
below.
CONSOLE AUDIO CONTROLS
A) MEDIA SKIP KEYS : Used to skip to previous or next audio track.
B) MEDIA RUN/PAUSE/STOP KEYS : Top button used to pause/play
media, bottom button stops media.
C) WORKOUT KNOB : controls speaker volume during workout. Ensure
your device volume is turned up.
CONNECTING VIA BLUETOOTH 4.0LE
1) Check to ensure that your music device is Bluetooth 4.0 compatible
2) Go into your device’s Bluetooth settings and scan for devices.
3) On your music device, locate the Bluetooth device list. Select your treadmill or elliptical unit that
appears on this list.
Wait for your music device to finish pairing with the unit.
4) You will know when pairing is successful when your music device shows the treadmill or elliptical unit
as now being a paired device.