manualshive.com logo in svg

Johnson Controls LSWU025, Руководство пользователя

Johnson Controls LSWU025 - компактное устройство для управления системами отопления и кондиционирования воздуха. Вы можете скачать бесплатный руководство по эксплуатации на нашем сайте. Управляйте вашими системами эффективно и без проблем с помощью Johnson Controls LSWU025. Скачайте его сейчас с manualshive.com.

Поделиться
Скачать
background image

JOHNSON CONTROLS

192

FORM 145.05-NOM7 

ISSUE DATE: 10/31/2019

SECTION 7 – PARAMETER DESCRIPTIONS AND OPTIONS

MENU ITEM

DEFINITION 

READY TO STOP COMP E

This is a derived value and means the minimum ON time has been achieved 
and compressor E ready to be de-energized. The User Interface displays either 
YES or NO.

READY TO STOP COMP F

This is a derived value and means the minimum ON time has been achieved 
and compressor F is ready to be de-energized. The User Interface displays 
either YES or NO.

REFRIGERANT TYPE

This parameter is programmed through the Options key and identifies the type 

of refrigerant in the unit. The choices are R22, R407C, or R410A.

RETURN AIR BYPASS - ACTIVE 
SETPOINT

This is a derived value and is the position of the by pass damper by percent 
open the Primary Controller uses as the bypass setpoint on a FlexSys unit.

RETURN AIR BYPASS - CURRENT

This is a derived value and is the current position of the by-pass damper by 
percent open on a FlexSys unit.

RETURN AIR ENTHALPY

This is a derived value and indicates the total heat content of the return air.

RETURN AIR HUMIDITY

This is a derived value and is the return air relative humidity.

RETURN AIR TEMP CURRENT

This is the actual return air temperature entering the unit.

SAFETY INPUT CHAIN A

This is a derived value and is the binary input to the Primary Unit Controller 
from the Compressor Safety Circuit Chain for compressor A. This includes the 
high pressure cutout and may include the compressor protection module. Okay 
means the safety circuit is normal and Faulted means it has faulted. 

SAFETY INPUT CHAIN B

This is a derived value and is the binary input to the Primary Unit Controller 
from the Compressor Safety Circuit Chain for compressor B. This includes the 
high pressure cutout and may include the compressor protection module. Okay 
means the safety circuit is normal and Faulted means it has faulted. 

SAFETY INPUT CHAIN C

This is a derived value and is the binary input to the Primary Unit Controller 
from the Compressor Safety Circuit Chain for compressor C. This includes the 
high pressure cutout and may include the compressor protection module. Okay 
means the safety circuit is normal and Faulted means it has faulted. 

SAFETY INPUT CHAIN D

This is a derived value and is the binary input to the Primary Unit Controller 
from the Compressor Safety Circuit Chain for compressor D. This includes the 
high pressure cutout and may include the compressor protection module. Okay 
means the safety circuit is normal and Faulted means it has faulted. 

SAFETY INPUT CHAIN E

This is a derived value and is the binary input to the Primary Unit Controller 
from the Compressor Safety Circuit Chain for compressor E. This includes the 
high pressure cutout and may include the compressor protection module. Okay 
means the safety circuit is normal and Faulted means it has faulted. 

SAFETY INPUT CHAIN F

This is a derived value and is the binary input to the Primary Unit Controller 
from the Compressor Safety Circuit Chain for compressor F. This includes the 
high pressure cutout and may include the compressor protection module. Okay 
means the safety circuit is normal and Faulted means it has faulted. 

SAT HIGH SETPOINT

This parameter is programmed through the Setpoints key. This establishes the 
maximum Active Supply Air Temperature to be used in a Variable Air Volume 
unit.

SAT LOW SETPOINT

This parameter is programmed through the Setpoints key. This establishes the 
minimum Active Supply Air Temperature to be used in a Variable Air Volume unit.

SAT RESET METHOD

This parameter is programmed through the PROGRAM key and identifies the 

supply air temperature reset method being used on a Variable Air Volume unit. The 
choices are Hardwired Input, Outside Temp, Return Temp, or Supply Fan Speed.

SF VFD BYPASS

This parameter is programmed through the OPTIONS key and identifies if a 

VFD bypass is installed in the unit. The options are Not Installed or Installed.

SF VFD BYPASS MODE

This parameter is set through the PROGRAM key and is used to place the sup-
ply fan VFD into bypass mode when a supply fan VFD bypass is installed. The 
options are VFD Active or VFD Bypassed.

TABLE 43 - 

DEFINITIONS (CONT'D)

Содержание LSWU025



















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для LSWU025

Panasonic CS-MKE7NKU Technical & Service Manual preview
CS-MKE7NKU
Бренд: Panasonic Страницы: 122
S&S Cycle Air Cleaner Installation Instructions Manual preview
Air Cleaner
Бренд: S&S Cycle Страницы: 8
Daikin SkyAir FHQ18PVJU Operation Manual preview
SkyAir FHQ18PVJU
Бренд: Daikin Страницы: 15
RS ARP-5008 Owner'S Manual preview
ARP-5008
Бренд: RS Страницы: 12
HTW INNOVA HTWS026INNR32-EXT Owners And Installation Manual preview
INNOVA HTWS026INNR32-EXT
Бренд: HTW Страницы: 22
AAF HCFA 2424 Installation, Operation And Maintenance Manual preview
HCFA 2424
Бренд: AAF Страницы: 12
Gree GJC12AG-E6DRNB9A Service Manual preview
GJC12AG-E6DRNB9A
Бренд: Gree Страницы: 50
Mars A-DVH09SF-0 Installation Manual preview
A-DVH09SF-0
Бренд: Mars Страницы: 36
AIROCIDE APS-200 Manual preview
APS-200
Бренд: AIROCIDE Страницы: 24
Daikin RR20AVAK9 Installation & Service Reference preview
RR20AVAK9
Бренд: Daikin Страницы: 72
Fedders 23-23-0381N-002 s Installation & Operation Manual preview
23-23-0381N-002 s
Бренд: Fedders Страницы: 20
Mitsubishi SUZ-KA09NA Service Manual preview
SUZ-KA09NA
Бренд: Mitsubishi Страницы: 42
REMEZA RFD 1000 Instruction Manual preview
RFD 1000
Бренд: REMEZA Страницы: 29
Mitsubishi Fresh Master GUF-100RD4 Handbook preview
Fresh Master GUF-100RD4
Бренд: Mitsubishi Страницы: 63
Unitary products group FC9S*UP Installation Manual preview
FC9S*UP
Бренд: Unitary products group Страницы: 28
Panasonic CS-YE9MKX Operating Instructions Manual preview
CS-YE9MKX
Бренд: Panasonic Страницы: 60
Panasonic CS-YS9UKA Operating Instructions Manual preview
CS-YS9UKA
Бренд: Panasonic Страницы: 28
Haier HPU-44C13 User Manual preview
HPU-44C13
Бренд: Haier Страницы: 32

Бренды по названию

Популярные бренды

Загрузить еще бренды