manualshive.com logo in svg

Johnson Controls LSWU025, Руководство пользователя

Поделиться
Скачать
Johnson Controls LSWU025 Скачать руководство пользователя страница 70

JOHNSON CONTROLS

70

FORM 145.05-NOM7 

ISSUE DATE: 10/31/2019

SECTION 2 – INSTALLATION

N

O.

FILTER OPTIONS

"A"

1

4 inch filter

102.06

2

4 inch Pre- 4 inch High Efficiency Filter

106.31

LD14352

27.85

102.00

109.10

12.20

23.91

OPTIONAL SOUND-ATTTENUATING (INLET) PLENUM

“A”

NO.

FILTER OPTIONS 

“A”

1 

2" FILTER 

100.06

2 

4" FILTER 

102.06

3 

2" PRE- 4" HIGH EFFICIENCY FILTER 

104.31

4

 4" PRE- 4" HIGH EFFICIENCY FILTER 

106.31

SOUND-ATTENUATING PLENUM OPTION CAN BE COMBINED

WITH ANY FILTER SECTION OPTION.

SOUND-ATTENUATING PLENUM SHIPS SEPARATELY FROM

BASE UNIT SEGMENT(S).

OPTION IS NOT AVAILABLE WITH DUCTED CONNECTIONS

WITH THIS OPTION THE TOP ROW OF FILTERS CAN ONLY BE

REMOVED FROM THE END OF THE FILTER RACK.

1.

2.

3.

4.

NOTES:

FIGURE 51 - 

UNIT DIMENSIONS ALL MODELS, INLET PLENUM (LSWU/F 070–105)

NOTES:

1. 

Sound-attenuating plenum option can be combined with any filter section option.

2.  Sound-attenuating plenum ships separately from base unit segment(s).
3.  Option is not available with ducted connections.
4. 

With this option the top row of filters can only be removed from the end of the filter rack.

5.  All dimensions are in English.
6. 

Due to the dedication of continuous product improvement and enhancements, the information/dimensions provided are subject to change 

without notice.

Содержание LSWU025



















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды