Jofemar Coffeemar G-250, Техническое руководство

Страница: 47 / 95

Coffeemar
G-250
// Coffee
MNP116M01GBV00 Date: 09/04/2013 Rev. 1 PAGE 47 OF 95
Move again using the programming button
to the option
PRODUCTION
RESET
.
To accept the option press any product selection pushbutton and the following
window will appear , press the programming button
the display will now show , press for a few
seconds the programming button and the screen will execute
at the end of the screen reset, the display will return to
the
START-UP MENU
.
To return to the
MAIN MENU
press coin return
.
To exit the function repeatedly press the product selection pushbutton to exit to the
main window.
Note:
This operation will configure all machine values back to factory settings.
VERY IMPORTANT:
This option is only for the technical support service.
5.13. Machine programming mode
5.13.1. Standby menu without credit (standby status)
This menu will be in standby status, shown on the display by rotating, in small intervals,
the advertising message, the machine model, the time, the JOFEMAR web address.
Press the product selection pushbutton panel and the display will show the price of the
product .
if there were no product
Note:
If the machine is out of service, the cause will be shown on the display. In such
PULSE PROG.
TO EXECUTE
KEEP PRESSED DOWN
TO EXECUTE
RESET PRODUCTION
RESETTING ---
PRODUCT
X.XX €
INSERT CREDIT
PRODUCT NOT AVAILABLE
X.XX €
MACHINE RESET
RESET PRODUCTION
RESET AUDITS
RESET X10 COMPACT
PRESS KEY
TO SEE PRICE