Jofemar Coffeemar G-250, Техническое руководство

Страница: 46 / 95

Coffeemar
G-250
// Coffee
MNP116M01GBV00 Date: 09/04/2013 Rev. 1 PAGE 46 OF 95
3.
The first thing the program requests is the type of operation you wish to carry out.
- Recording a program in flash memory.
- Erasing the card’s flash memory.
- Identifying the program recorded in a card.
4.
After choosing the operation, you have to select the machine with which you wish to
communicate.
5.
You need to select the file you are going to record.
-The program can work with two standard reference file formats, .HEX (Intel) and
.BIN. When the program has more than one bank, the file extensions will be .H00,
.H01, .H02 Y (or .B00, .B01, .B02 Y) and so on until all banks are completed. In
these cases, the program will only show the file of the first bank (.H00 or .B00).
-When you select a file, if the extension is .HEX or .BIN the program will know that
there is only one bank, while if it is .H00 or .B00 it will search for files with
consecutive extensions until it does not find any more (maximum .H09 or .B09) and
the number of files will be the number of banks recorded.
6.
After all the data has been recognised, the program will begin the chosen operation.
- This process is divided in two parts, the first is erasing the flash memory and the
second is the program recording.
7.
When the recording program has finished communicating with the machine, a new
window will appear showing the result of the process.
(For more information, consult the manual of the EASYFLASH reprogramming device)
5.12. Machine reset
The machine is factory configured with the initial values for product pushbutton panel and
audits. If the technical support service considers it appropriate, the machine can be reset
with all channels empty, in which case the following operation must be carried out.
With the main window on the display, press the programming button
for a few
seconds, until you see the
MAIN MENU
.
then you will
see
Move with the programming button to the option
MACHINE RESET
to accept the
option press any product selection pushbutton and the following menu will appear,
START MENU
MACHINE RESET
MACHINE FATIGUE
MACHINE CONFIGURATION
MAIN MENU
PERSONAL MENU
OPERATOR MENU
TECHNICAL MENU
VENDING MENU
MACHINE MENU
PERIPHERALS MENU
SETTINGS MENU
COMMUNICATION MENU